Portfolio (23 projects)

Jun 2026 - Current

North Bridge Leisure Centre Halifax

BIM Modeller
RevitNavisworksAutoCADACMVElectricalPlumbingFire Protection
  • Produced coordinated LOD 350 MEP and Builders Work models in Revit for a 2-storey leisure centre development, ensuring compliance with BIM execution requirements across multiple service systems
  • Performed structured Navisworks coordination cycles, identifying and resolving 100+ clashes across 5 disciplines prior to construction
  • Coordinated complex service routing for plant rooms, ceiling zones, and vertical distribution systems to ensure fully buildable installation layouts
  • Developed coordinated MEP families and builders work components, improving modeling standardization and consistency across project deliverables
North Bridge Leisure Centre Halifax - 1
North Bridge Leisure Centre Halifax - 2
Jun 2026 - Current

Larian Studios 1 Farnham Road Guildford

BIM Modeller
RevitNavisworksAutoCADACMVElectricalPlumbingFire Protection
  • Developed coordinated LOD 350 MEP and Builders Work BIM models for a commercial office development, supporting spatial integration of building services within architectural and structural constraints
  • Executed Navisworks coordination cycles, resolving 100+ interdisciplinary clashes involving MEP services, structural openings, and architectural interfaces
  • Supported detailed coordination of plantroom layouts, riser zones, and ceiling service distribution, ensuring efficient routing of ducting, pipework, containment, and builders work penetrations
May 2026 - May 2026

PEEK-91 Montague Rd Riverdale

BIM Modeller
RevitNavisworksElectrical
  • Developed coordinated LOD 350 Electrical BIM models in Revit for a residential development, focusing on lighting and small power systems in accordance with BIM execution requirements
  • Executed electrical coordination reviews using Navisworks, resolving 50+ clashes between electrical services and architectural/structural elements prior to construction
  • Coordinated detailed electrical layouts including lighting design and socket distribution, ensuring efficient spatial integration within residential unit layouts and common areas
Apr 2026 - Apr 2026

FR-Sloane St

Foreman RobertsBIM Modeller
RevitNavisworksACMVElectricalPlumbingFire Protection
  • Developed coordinated Stage 4 LOD 350 MEP Revit models for Mechanical, Electrical, Plumbing, Domestic Water, and Fire Protection systems, ensuring buildable spatial integration across all building services
  • Produced and maintained a federated multi-discipline BIM model containing 500+ coordinated MEP elements, supporting detailed design validation and construction-ready outputs
  • Conducted structured Navisworks coordination cycles, identifying and managing 200+ clashes across MEP and architectural/structural interfaces
  • Developed and refined 15+ Revit MEP families, improving modelling efficiency and reducing repetitive content creation by 20-30%
FR-Sloane St (Foreman Roberts) - 1
Apr 2026 - Apr 2026

MBA-Secondment

MBA ConsultantsBIM Modeller
RevitNavisworksACMVElectricalPlumbingFire Protection
  • Developed and coordinated LOD 350 MEP Revit models, integrating 300-600+ model components per project across Mechanical, Electrical, Plumbing, Domestic Water, and Fire Protection systems
  • Performed regular Navisworks clash detection reviews, identifying and managing 80-200+ clashes per project including coordination issues between MEP services and architectural/structural elements
  • Created, customized, and maintained Revit MEP families (15-25+ per project), improving modelling efficiency and reducing repetitive modelling effort by 15-30%
Mar 2026 - Mar 2026

MBA - Nine Elms

MBA ConsultantsBIM Modeller
RevitNavisworksACMVElectricalPlumbingFire Protection
  • Developed and coordinated LOD 350 MEP Revit models, integrating 300-600+ model components per project across Mechanical, Electrical, Plumbing, Domestic Water, and Fire Protection systems
  • Performed regular Navisworks clash detection reviews, identifying and managing 80-200+ clashes per project
  • Created, customized, and maintained Revit MEP families (15-25+ per project), ensuring correct connectors, parameters, and system classification
Mar 2026 - Mar 2026

CBDSP-Center of Excellence DD Stage

BIM Modeller
RevitNavisworksACMVElectricalPlumbingFire Protection
  • Developed and coordinated LOD 350 MEP Revit models within a 2-month project duration, supporting Mechanical, Electrical, Plumbing, Domestic Water, and Fire Protection systems
  • Performed regular Navisworks clash detection reviews, identifying and managing 30-70+ clashes including coordination issues between MEP services and architectural/structural elements
  • Created and maintained Revit MEP families (8-15+ project-specific components), ensuring correct connectors, parameters, and system classification
Feb 2026 - Feb 2026

MBA - Chambers Wharf

MBA ConsultantsBIM Modeller
RevitNavisworksACMVElectricalPlumbingFire Protection
  • Developed and coordinated LOD 350 MEP Revit models, integrating 300-600+ model components per project across Mechanical, Electrical, Plumbing, Domestic Water, and Fire Protection systems
  • Performed regular Navisworks clash detection reviews, identifying and managing 80-200+ clashes per project
  • Created, customized, and maintained Revit MEP families (15-25+ per project), improving modelling efficiency and reducing repetitive modelling effort by 15-30%
Feb 2026 - Feb 2026

COE - Centre of Excellence SD Redesign

BIM Modeller
RevitNavisworksBIM 360ACCACMVElectricalPlumbingFire Protection
  • Developed and coordinated LOD 350 MEP Revit models, integrating 300-600+ model components per project across Mechanical, Electrical, Plumbing, Domestic Water, and Fire Protection systems
  • Managed issue-based coordination workflows using BIM collaboration platforms (BIM 360 / ACC / Navisworks Issues), enabling structured communication with project stakeholders
  • Performed regular Navisworks clash detection reviews, identifying and managing 80-200+ clashes per project
May 2025 - Jan 2026

CBDSP-Keturah Resort SD

BIM Modeller
RevitNavisworksBIM 360ACCPlumbingElectrical
  • Developed and coordinated LOD 350 MEP Revit models with focus on Plumbing Drainage systems, ensuring accurate integration of soil, waste, and rainwater drainage networks
  • Performed regular Navisworks clash detection reviews, identifying and managing 80-200+ clashes per project including coordination issues between drainage pipework, other MEP services, and architectural/structural elements
  • Managed issue-based coordination workflows using BIM collaboration platforms (BIM 360 / ACC / Navisworks Issues)
Apr 2025 - Oct 2025

FR-Friary Park Stage 3

Foreman RobertsBIM Modeller
RevitNavisworksBIM 360ACCACMVElectricalPlumbingFire Protection
  • Supported the development of LOD 350 MEP Revit models under guidance of the Team Lead, assisting in Mechanical, Electrical, Plumbing, Domestic Water, and Fire Protection coordination
  • Assisted in QAQC checks and Navisworks clash detection cycles, supporting identification and documentation of 80-200+ coordination issues per project
  • Supported MEP corridor service coordination, including drainage, water supply, ventilation, small power, lighting, and containment systems
May 2025 - Jul 2025

3D Walkthru - Data Center

WowrackFreelance BIM Modeller
RevitNavisworksACMVElectricalArchitecture
  • Produced 3D BIM models in Revit based on client sketches and design intent, focusing on ducting systems, equipment layouts, and fiber way routing, translating 2D/early design inputs into coordinated 3D models with 200-600 model elements per coordination package
  • Developed a 3D walkthrough visualization using Twinmotion, converting Revit models into presentation-quality outputs for design review and client presentations
  • Performed Navisworks clash detection and coordination reviews, identifying and resolving 100+ clashes across ducting routes, equipment positioning, fiber pathways, and structural/architectural penetrations
  • Developed parametric Revit families (custom family generators) for project-specific components, standardizing 10-30+ families/components and reducing repetitive modeling time by 20-35%
3D Walkthru - Data Center (Wowrack) - 1
3D Walkthru - Data Center (Wowrack) - 2
Jan 2024 - Jun 2025

CUN-Palm Resorts DD Stage

CundallBIM Modeller
RevitNavisworksBIM 360ACCACMVElectricalPlumbingFire Protection
  • Supported the development of LOD 350 MEP Revit models under guidance of the Team Lead, assisting in Mechanical, Electrical, Plumbing, Domestic Water, and Fire Protection coordination
  • Assisted in QAQC checks and Navisworks clash detection cycles, supporting identification of 80-200+ coordination issues per project
  • Assisted in issue-based coordination workflows using BIM collaboration platforms (BIM 360 / ACC / Navisworks Issues)
May 2025 - May 2025

WCL-Newbury Park

WCL InfrastructureBIM Modeller
RevitNavisworksBIM 360ACCFire Protection
  • Supported the development of LOD 350 MEP Revit models under guidance of the Team Lead, focusing solely on dry riser (firefighting riser) systems
  • Assisted in QAQC checks and Navisworks clash detection cycles, supporting identification of 80-200+ coordination issues specifically related to dry riser routes and riser shafts
  • Supported coordination of dry riser systems and vertical riser shafts, ensuring correct routing, alignment, segregation, and clearance within building service cores
Jun 2024 - May 2025

FR-Leven Road Stage 4A Redesign

Foreman RobertsBIM Modeller
RevitNavisworksBIM 360ACCACMVElectricalPlumbingFire Protection
  • Supported the development of LOD 350 MEP Revit models under guidance of the Team Lead, assisting in Mechanical, Electrical, Plumbing, Domestic Water, and Fire Protection coordination
  • Assisted in QAQC checks and Navisworks clash detection cycles, supporting identification and documentation of 80-200+ coordination issues per project across drainage, water services, ventilation, electrical containment, lighting, and architectural/structural interfaces
  • Assisted in issue-based coordination workflows using BIM collaboration platforms (BIM 360 / ACC / Navisworks Issues)
Mar 2023 - Dec 2023

FR-Watermeadow Stage 4C

Foreman RobertsBIM Modeller
RevitNavisworksACMVElectricalPlumbingFire Protection
  • Supported the development of LOD 350 MEP Revit models under guidance of the Team Lead by updating models based on engineering markups, redlines, and coordination instructions across Mechanical, Electrical, Plumbing, Drainage, and Fire Protection systems
  • Produced and modified Revit MEP layouts based on design revisions, ensuring updates were accurately reflected in the model in accordance with BIM execution requirements
  • Assisted in basic coordination support using Navisworks outputs, reviewing clash reports provided by the coordination team and applying required model adjustments
Nov 2022 - Dec 2023

FR-St Johns Hill Stage 4AC

Foreman RobertsBIM Modeller
RevitNavisworksACMVElectricalPlumbingFire Protection
  • Supported the development of LOD 350 MEP Revit models under guidance of the Team Lead by updating models based on engineering markups, redlines, and coordination instructions across Mechanical, Electrical, Plumbing, Drainage, and Fire Protection systems
  • Produced and modified Revit MEP layouts based on design revisions, ensuring updates were accurately reflected in accordance with BIM execution requirements and project standards
  • Updated MEP corridor layouts and service routes, including drainage, water supply, ventilation, electrical containment, lighting, and fire protection systems, based on engineer markups and coordinated drawings
FR-St Johns Hill Stage 4AC (Foreman Roberts) - 1
FR-St Johns Hill Stage 4AC (Foreman Roberts) - 2
May 2022 - Nov 2023

White Chapel

BIM Modeller
RevitNavisworksACMVPlumbing
  • Supported the development of LOD 350 Mechanical and Drainage Revit models under the guidance of the Team Lead by updating models based on engineering markups, redlines, and design instructions
  • Produced and edited basic Revit MEP models, focusing on mechanical layouts and drainage pipe routing, ensuring drawings were updated in line with issued revisions
  • Carried out basic Revit editing tasks, including annotations, tagging, and parameter updates for documentation purposes
Jan 2018 - Aug 2021

Okada Manila

Tiger Resort Leisure and Entertainment Inc.AutoCAD Team Lead - Mechanical Works
AutoCADACMVPlumbingFire Protection
  • Produced 2D CAD drawings for Mechanical, Plumbing, Drainage, and Fire Protection systems, delivering up to 15-40 drawing sheets per project package across multiple disciplines
  • Developed detailed construction outputs including plans, sections, elevations, riser diagrams, and layouts, supporting 5-10 concurrent projects at any given time
  • Managed and supervised 3-8 personnel (AutoCAD drafters/junior staff), distributing workloads, monitoring output, and supporting day-to-day drafting operations
  • Maintained full drawing control including revision logs, sheet registers, and documentation tracking, ensuring 100% traceability of changes across project revisions
Okada Manila (Tiger Resort Leisure and Entertainment Inc.) - 1
Okada Manila (Tiger Resort Leisure and Entertainment Inc.) - 2
Mar 2020 - Mar 2020

Filmore Suites (Formerly Brooklyn House)

BTM Engineering ServicesOn-site Freelance AutoCAD Operator
AutoCADACMVPlumbingFire Protection
  • Conducted on-site verification and produced accurate as-built drawings across Mechanical, Plumbing, and Fire Protection systems based on actual installed site conditions
  • Developed detailed 2D AutoCAD drawings reflecting existing site conditions, including system layouts and installed services
  • Delivered a complete as-built package (30+ sheets) to support project close-out, documentation, and compliance submission
Jan 2020 - Jan 2020

Continuum Package Corp.

BTM Engineering ServicesFreelance AutoCAD Operator
AutoCADFire Protection
  • Produced 3-sheet as-built drawing set for a wet standpipe fire protection system based on client-provided markups, site photos, and existing documentation
  • Updated and refined 2D AutoCAD drawings to reflect installed conditions, ensuring alignment with provided reference materials
  • Coordinated with the client and site personnel to clarify drawing requirements and validate system information
Oct 2017 - Jan 2018

UNTV Broadcast Center

Breakthough and Milestones Production Int'l. Inc.AutoCAD Operator / Engineering Assistant
AutoCADACMV
  • Prepared Combined Services Drawings (CSD) integrating MEP systems with primary focus on Mechanical services coordination, covering up to 5 disciplines per coordinated drawing set
  • Produced mechanical shop drawings including HVAC ducting systems, chilled water piping networks, equipment layouts, and coordination details
  • Conducted actual site surveys, measurements, and inspections, validating installation conditions across 50-150+ MEP service points per project area for accurate as-built documentation
  • Coordinated with engineers, architects, and site teams to resolve MEP coordination issues with typical response and resolution turnaround of 24-72 hours
UNTV Broadcast Center (Breakthough and Milestones Production Int'l. Inc.) - 1
Jun 2014 - Sep 2017

Multiple Projects (Philippines)

AutoCAD Operator (Mechanical)
AutoCADACMVElectricalPlumbing
  • Produced and updated 100+ mechanical, coordination, and as-built drawings across 12+ projects including Avida Towers Centera, SunPower FAB-4, Lyceum of Batangas, NAIA Terminal 3, and other residential, commercial, and industrial developments
  • Developed detailed 2D Mechanical (HVAC) layouts, plans, sections, and installation details based on project requirements, site conditions, and construction standards
  • Conducted site visits and field measurements to verify existing conditions and prepare accurate as-built documentation for ongoing and completed projects
  • Coordinated Mechanical drawings with 3 additional disciplines (Electrical, Plumbing, and Architectural), ensuring service integration and minimizing drawing conflicts