MEP BIM Services for Subcontractors
MEP BIM models built from your shop drawings. We handle clash detection, coordination with other trades, and deliver models ready for your main contractor's federated model.
No BIM software needed. No Revit licence. No trained staff. Send us your 2D shop drawings and we return a coordinated, clash-free BIM model that meets regulatory requirements.
20 Years of BIM Excellence
Trusted Partner Since 1995
How Our MEP BIM Modelling Services Work
Your main contractor needs a BIM model, but your team works in AutoCAD. No problem. Send us your shop drawings and we handle the rest.
Send Us Your MEP Drawings
Share your AutoCAD files, PDFs, or 2D sketches. Any format, any stage. We review your scope and confirm what we need to get started.
Build, Federate & Coordinate Your MEP Model
Our BIM coordinators model your MEP systems in 3D, federate them with the architectural and structural models, and run full clash detection across all trades.
Receive a Coordinated BIM Model
We deliver a coordinated, clash-free BIM model your main contractor can use in their federated model, plus a clash report, shop drawing extractions, and submission-ready files where required.
What Your MEP Team Gets From BIM
Everything your main contractor needs, delivered ready to use.
Coordinated 3D MEP BIM Model
Your trade systems are modelled in 3D and coordinated against architecture, structure, and all other MEP disciplines, including ACMV, fire protection, plumbing, and electrical. All clashes are detected and resolved before they reach the site. IFC+SG compliant where regulatory submission is required.
MEP Coordination Best Practices
BIM Quantity Takeoffs for MEP Trades
Extract cost and material schedules from piping, ducting, and other MEP elements with custom-built BIM libraries tailored to your product specifications.
MEP Shop Drawings & Site Documentation
Formal shop drawings and setting-out plans are extracted directly from the coordinated BIM model: pipe layouts, spool drawings, equipment schedules, and duct routing plans ready for your site team and SCDF submission where required.
Get Your MEP BIM Scope Reviewed
Share your project documents and we will come back to you with a deliverable schedule, timeline, and fixed-scope proposal.
Why Subcontractors Choose Our BIM Services
We work with fire protection, plumbing, ACMV, and electrical subcontractors across Singapore. Here's what sets us apart.
Dedicated BIM Coordinator for Your Trade
One point of contact who understands your trade scope, liaises with the main contractor on your behalf, and keeps your model current through design changes.
Clash-Free MEP Coordination
Sprinkler heads, ACMV ducts, structural beams. We coordinate all trades into a single federated model and resolve clashes before they reach the site.
BIM Software & Licences Included
We build the BIM model using Revit, Navisworks, and Autodesk Construction Cloud. No licences, no new software, and no trained staff required on your end.
Accurate MEP Quantity Takeoffs
BIM-extracted quantity takeoffs for your MEP scope: pipe lengths, equipment counts, and duct areas directly from the coordinated model.
BIM Modelling for All Major MEP Trades
We model fire protection, plumbing & sanitary, ACMV, electrical containment, chilled water, and BMS systems. Name your trade, we have done it.
BIM Delivery Aligned With Your Construction Programme
Delivery milestones are tied to your main contractor's programme. Urgent model updates can be turned around the same day when your site schedule demands it.
MEP BIM Modelling for Every Trade
Find qualified BIM professionals for your specific trade.
Fire Protection BIM Modelling
Sprinkler layouts, wet and dry risers, FM200/CO₂ suppression, and hose reel networks. Modelled to SCDF requirements.
Plumbing & Sanitary BIM Modelling
Potable water, drainage, sanitary, sewerage, and grease trap systems. Routed and coordinated within the federated model.
ACMV BIM Modelling
Air-conditioning, mechanical ventilation, fresh and exhaust air, and chilled water pipework. Clash-detected against all other trades.
Electrical BIM Modelling
Cable containment, LV distribution, emergency lighting, and ELV systems. Sized and routed to avoid clashes with structure and MEP.
Interior Design BIM Modelling
Furniture layouts, FF&E coordination, space planning, and finishes. Modelled to support tenancy fit-out and design intent.
BMS / ELV BIM Modelling
Building management systems, access control, CCTV, and data infrastructure. Coordinated within the architectural and MEP model.
From Our Clients
Our Favourite BIM Tools
Revit, ArchiCAD, Tekla, Navisworks, BIM Collaborate Pro. Your coordinators are trained in the platform your project already uses.
Frequently Asked Questions About MEP BIM Services
My main contractor asked for a BIM model. Where do I start?+
First, request the base architectural and structural model from your main contractor, or ask for access to their Common Data Environment (CDE) so we can work from the correct federated model. Then send us your 2D drawings in AutoCAD, PDF, or hand sketches. We'll review your scope, confirm what is needed, and give you a fixed price and delivery timeline. No BIM software or experience required on your end.
How much does MEP BIM modeling cost?+
Pricing depends on the number of systems, floor area, and coordination complexity. We provide a fixed-scope quote after reviewing your drawings, so there are no surprises. Contact us with your project details for a quote.
Do I need to provide an IFC model for regulatory submission?+
Your main contractor may need to submit a coordinated federated BIM model that includes your MEP systems. You may not need to submit directly, but you may need to provide an IFC+SG compliant model of your scope. We build that model from your drawings and deliver it ready for federation and submission.
Can you work with PDF or 2D drawings?+
Yes. We obtain architectural and structural models from the main contractor or consultant, then develop 3D MEP models from your 2D drawings in AutoCAD, PDF, or even hand sketches. The model is coordinated against the federated model to ensure no clashes.
Do you attend coordination meetings on our behalf?+
Yes. Your dedicated BIM coordinator can attend ICE sessions and coordination meetings with the main contractor, either on-site or virtually. We present clash reports, walk through the model, and update it based on decisions made during the meeting.
How do you handle design changes and ongoing coordination?+
A dedicated BIM coordinator handles your project in an ISO 19650-compliant environment. We update MEP systems as designs evolve, attend ICE sessions and coordination meetings with the main contractor on your behalf (on-site or virtually), and update the model based on decisions made during those meetings.
Ready to start your BIM project?
From model authoring to CORENET X submission. Our embedded BIM team handles it end to end.